The psaltery is one of the oldest string instruments to ever be recorded in history. It is basically a combination or fusion of a harp and a violin that produces a rather eerie but at the same time beautiful sound. Now if one would want to try playing this kind of instrument, he can actually make handmade psalteries in his house where he may try.
To begin the process, one has to first make sure that he makes the frame. Now do take note that the frame is one of the most important parts of the entire instrument because it is the thing that holds everything. So if one would want to make the frame, he has to first cut out two thin pieces of plywood for the sides and a thick piece for the base.
Upon cutting up these three pieces, one must now use some glue to put them all together. Now he must make use of a wood glue that has the capacity to keep the wood pieces together. Now he must first apply the glue, stick the wood pieces, and then wait for a while until the glue dries.
The next thing to do now would be to attach the back. Now since the entire shape of this instrument is a triangle, then naturally the back would also be in the shape of a triangle. When a triangle pieces of wood has already been cut up, then one can attach it to the back using that special glue.
Now when he has already attached the back to the frame, he now has to attach the front which is the soundboard. Now since the soundboard is located at the front of the psaltery, this means that the pins and strings are there. Now one just has to cut out the exact same shape as the back and attach it to the front.
Once he has created the entire thing, he must now cut out a small tuning hole in the middle of the creation and put some pins. Now in order to put the pins, he must drill some holes in the wood where he will stick the pins. To know where he should put the pins, he may actually search the internet for some instructions.
Once the pins are already in their place, the next thing to do would be to place the strings. If one does not know where to buy strings, he should try visiting a guitar or violin store. Once the strings have been acquired, one must use a pair of pliers to tie the strings around the pins.
Now once he has put the strings up, he then has to put the bridge. Now the bridge is actually very crucial because it is the part that will allow the psaltery to create a nice sound. Now the location of the bridge would be near the pins at the base of the instrument. Only after he has already attached everything that he can now just start plucking or strumming the strings. Now if he would want, he can actually create a bow for his psaltery but that can be done next time.
To begin the process, one has to first make sure that he makes the frame. Now do take note that the frame is one of the most important parts of the entire instrument because it is the thing that holds everything. So if one would want to make the frame, he has to first cut out two thin pieces of plywood for the sides and a thick piece for the base.
Upon cutting up these three pieces, one must now use some glue to put them all together. Now he must make use of a wood glue that has the capacity to keep the wood pieces together. Now he must first apply the glue, stick the wood pieces, and then wait for a while until the glue dries.
The next thing to do now would be to attach the back. Now since the entire shape of this instrument is a triangle, then naturally the back would also be in the shape of a triangle. When a triangle pieces of wood has already been cut up, then one can attach it to the back using that special glue.
Now when he has already attached the back to the frame, he now has to attach the front which is the soundboard. Now since the soundboard is located at the front of the psaltery, this means that the pins and strings are there. Now one just has to cut out the exact same shape as the back and attach it to the front.
Once he has created the entire thing, he must now cut out a small tuning hole in the middle of the creation and put some pins. Now in order to put the pins, he must drill some holes in the wood where he will stick the pins. To know where he should put the pins, he may actually search the internet for some instructions.
Once the pins are already in their place, the next thing to do would be to place the strings. If one does not know where to buy strings, he should try visiting a guitar or violin store. Once the strings have been acquired, one must use a pair of pliers to tie the strings around the pins.
Now once he has put the strings up, he then has to put the bridge. Now the bridge is actually very crucial because it is the part that will allow the psaltery to create a nice sound. Now the location of the bridge would be near the pins at the base of the instrument. Only after he has already attached everything that he can now just start plucking or strumming the strings. Now if he would want, he can actually create a bow for his psaltery but that can be done next time.
About the Author:
When you are looking for information about handmade psalteries, you can pay a visit to the web pages online here today. Details are available at http://www.davespsaltery.com now.
Aucun commentaire:
Enregistrer un commentaire