Having a night presentation and event requires you to use lighting as much as possible. You have many options that you can choose when you are worried about the lighting of the stage for your presentation or event. If you want a good one, then you should consider having an RGB laser show system.
The said equipment is the one where you will be using lasers to shoot off beams that will make the venue more concert-like. The stage will be adorned with different colored lights. The audience will feel more excitement as well. If you plan to use this lighting to make the event successful, then here are the factors to take note of.
First, you have to be aware of the beam direction. The said equipment will usually be positioned in front of your audience so that the beams are aimed over their heads. You have to pick the right position where they can produce the best lighting that you need to achieve the special effect you require in the stage.
You will also have to be aware of the graphics screen you are going to use on the stage. For the graphics screen, the rear-projection is obviously preferred over the front-projection. You will achieve a more magical effect since the audience does not see the beams creating the graphics you want to let them see.
It is important that you are aware of the equipment positioning as well. It is not just about the screen or the beams. You also have to worry about the direct-feed projects since these are what join the lasers as well as scanners to create a single projector unit. You have to do a proper job at the positioning of the equipment you are using.
Control set up time and positioning. Having control over the positioning and the set-up time of this equipment is definitely a good thing for you. It will be easier for the person to decide on the graphics as well as what would happen when he or she has full control of the set up time or positioning of the said equipment.
Know what the safety regulations are regarding the use of the projectors and other equipment. There are surely recognized safety requirements that must be met when you are using the said equipment. Not only that, there are also government laws and federal laws that you have to pay close attention to.
Know what the ceiling heights that must be taken into account should be. There are requirements that the state has given regarding the height and even the lateral space that should be taken when you are using this equipment. It is your job to follow through with the requirements the state has set.
Pay attention to any reflective surfaces in the venue. When there are reflective surfaces such as chandeliers and mirror strips in the venue, make sure that the beams does not bounce off into the audience area. If this is the case, then you have to mas the beams to avoid stray reflections. The audience might be harmed if you do not take this safety precaution for them seriously.
The said equipment is the one where you will be using lasers to shoot off beams that will make the venue more concert-like. The stage will be adorned with different colored lights. The audience will feel more excitement as well. If you plan to use this lighting to make the event successful, then here are the factors to take note of.
First, you have to be aware of the beam direction. The said equipment will usually be positioned in front of your audience so that the beams are aimed over their heads. You have to pick the right position where they can produce the best lighting that you need to achieve the special effect you require in the stage.
You will also have to be aware of the graphics screen you are going to use on the stage. For the graphics screen, the rear-projection is obviously preferred over the front-projection. You will achieve a more magical effect since the audience does not see the beams creating the graphics you want to let them see.
It is important that you are aware of the equipment positioning as well. It is not just about the screen or the beams. You also have to worry about the direct-feed projects since these are what join the lasers as well as scanners to create a single projector unit. You have to do a proper job at the positioning of the equipment you are using.
Control set up time and positioning. Having control over the positioning and the set-up time of this equipment is definitely a good thing for you. It will be easier for the person to decide on the graphics as well as what would happen when he or she has full control of the set up time or positioning of the said equipment.
Know what the safety regulations are regarding the use of the projectors and other equipment. There are surely recognized safety requirements that must be met when you are using the said equipment. Not only that, there are also government laws and federal laws that you have to pay close attention to.
Know what the ceiling heights that must be taken into account should be. There are requirements that the state has given regarding the height and even the lateral space that should be taken when you are using this equipment. It is your job to follow through with the requirements the state has set.
Pay attention to any reflective surfaces in the venue. When there are reflective surfaces such as chandeliers and mirror strips in the venue, make sure that the beams does not bounce off into the audience area. If this is the case, then you have to mas the beams to avoid stray reflections. The audience might be harmed if you do not take this safety precaution for them seriously.
Aucun commentaire:
Enregistrer un commentaire