Glass carving is an artistic technique used for inscription of creative designs as well as symbols. There is a technique known as sand-carving that was developed in the late 19th century and is used for creation of multilevel abrasive etchings on glasses. After etching of the design into the glasses, there is addition of light and shadow details. In considering glass carving Alberta residents should appreciate its uses; creation of gemstone, windows, sculptures and more.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
What follows is application of masking tape at the stencil edges. This is generally done at the sections where the stencil meets glass. The masking tape helps to protect areas where carving is not needed. Such areas would ruin the design if they came into contact with the cream. The cream is applied onto the form brush, which is then used for evening out the application. The best way to ensure cream covers every section is to monitor the edges and corners closely.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
For those that are looking to take up glass carving Alberta offers one of the best environments. Starting the business would need 3 main things, namely, resists, a blast cabinet and a studio that is well lit. The right marketing strategies will ensure the business picks up fast.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
What follows is application of masking tape at the stencil edges. This is generally done at the sections where the stencil meets glass. The masking tape helps to protect areas where carving is not needed. Such areas would ruin the design if they came into contact with the cream. The cream is applied onto the form brush, which is then used for evening out the application. The best way to ensure cream covers every section is to monitor the edges and corners closely.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
For those that are looking to take up glass carving Alberta offers one of the best environments. Starting the business would need 3 main things, namely, resists, a blast cabinet and a studio that is well lit. The right marketing strategies will ensure the business picks up fast.
About the Author:
You can visit the website www.claudegarneaustudio.ca for more helpful information about Procedures Involved In Glass Carving Alberta
Aucun commentaire:
Enregistrer un commentaire